Cyklone CY/LCY

A cyclone is used as pre-separator for coarser particles. Especially suitable before a filter unit to filter larger particles. Thus sparing a filter material.

Gram cyclones are available in 3 models: 1. Model CY, for low pressure. 2. Model CY-V, for high pressure. 3. Model LCY, for lighter materials. Many combinations, e.g. regarding dust and particle Collection.

Product Features

Easy mounting
Wide range of equipment
Inlet is placed in the left side
High pressure cyclones for high pressure connections
Cyclones for very light particles
Dust container outlet equipment for continuous outlet

Product Highlights

Inlet connection in the left side

Connection

Are available with dust container or sack holder

Dust container

Discharge connection for bulk bag

Bulk bag

Connections equipped with JKF-flanges (high vacuum)

JKF-flange

Further data

For the separation of certain material types/chips at larger material volumes you can advantageously use a cycklone as pre-separator.

Through coarse separation by cyclone the filter material load is reduced, whereby the operating costs are reduced.

Gram cyclones are available in 3 models:

CY	Air volume:	500 - 30,000m³/h
	Vacuum:	Up to 5,000Pa
	Rise velocity (immersion tube):	Approx. 20m/s
	Intended for low pressure
CY-V	Air volume:	1,000 - 8,000m³/h
	Vacuum:	Up to 40,000Pa
	Rise velocity (immersion tube):	Approx. 20m/s
	Intended for high pressure
LCY	Air volume:	1,500 - 7,000m³/h
	Vacuum:	Up to 5,000Pa
	Rise velocity (immersion tube).	Approx. 1.5m/s
	Intended for lighter materials by speed reduction

CY_IMG_CY500-40L — Cyclone type CY 500 - 1500 incl. 40L dust container

Dust/particle collection can take place by dust container (40-150L) or sack rack (380L).

At larger material volumes the cyclone can be place on a under frame and equipped with equipment for pressureless outlet to bulk bag.

For simple connection to high-vacuum dust the inlet and outlet are equipped with JKF-flanges.

Filter cabinet is made in 2mm black steel plate and subsequently powder enamelled.

Is available in hot-galvanized, enamelled steel plates for outdoor mounting.

Is available in explosion-protected/-reliefed version for application in ATEX-zones.

Futher is available:

Lockable inspection cover below on the cyclone side.
Sack insert for 72L-dust container
380L-sack rack
Under frame and connections for bulk bag and drop pipe for customer specific containers, see brochure page
Under frame for extension of bulk bag, shielded with door and micro-switch
Temperature sensor type RT101 as well as signal devices
Fill-level sensor type OEM-K