Electrical products

System guard type L meets the governmental demands for system monitoring in extraction units. Is delivered as complete package. Simple, stabile and easy to Mount.

• System guard L0 is used for measuring range: 20-300 Pa
• System guard L1 is used for measuring range: 200-1,000 Pa
• System guard L3 is used for measuring range: 1,000-4,000 Pa
• System guard L4 is used for measuring range: 2,300-21,500Pa
• The product is CE-marked
• Maximum differential pressure: 40mbar (4000 Pa), L0, L1, L3
• Maximum differential pressure: 600mmbar (60kPa), L4
• All versions are available with electric bulb or LED

Smart Power socket can control start/stop of fans and motor damper in connection with process extraction.

• Dependable component for start/stop-control
• Equipped with touch-folie and diode on front
• After-run time: adjustable between 1 sec and 4 minutes
• Socket available in 16, 32 and 64 ampere
• 16 ampere power socket is available with 230V-plug

Smart Power Box is used as start/stop-control of several dampers/machines by e.g. micro-switch/potential free switches.

• Dependable component for start/stop-control
• Integrated 230VAC/24VDC-transformer
• Equipped with touch-folie and diode on front
• After-run time: adjustable between 1 sec and 4 minutes
• Max. load 400 Watt. Protected with 2 Amp relay

Motor protection switch is used to start and stop a motor, e.g. in connection with a fan. Protects against short circuit, overload and phase failure.

• Durable reliable motor protection switch
• Easy, technical way to start and stop a motor
• Suitable for workshop environment
• Designed and tested according to EN 60947

Motor protection switch is used to start and stop a motor, e.g. in connection with a fan. Protects against short circuit, overload and phase failure.

• Durable reliable motor protection switch
• Easy, technical way to start and stop a motor
• Suitable for workshop environment
• Designed and tested according to EN 60947

Motor starter Y-D is used to start a larger motor. Can be controlled remotely by a contact box. Is used among other things on filter unit type FL for process extraction.

• Automatic start-delta starter
• Protects the wiring
• Easy operation
• Control voltage 230 VAC
• IP 65 protected
• Approved according tol EN 60947
• Y-D-motor starters can be used for Gram fans type VE and RV from 5.5kW

Compact and user-friendly frequency converter type VLT FC102 for use as fan starter and regulator. Operated by digital display on converter front.

• Compact, user-friendly design
• Including instructions for PID-regulation
• User-friendly display on converter front
• Available in 17 versions for kW between 1.10 - 90.00
• Applicable for max. ampere between 2.70 and 161.00.
• Supply 3 x 400 VAC, 3 phase + N + PE

Gram pressure transmitter is excellent as signaller for frequency converters (with PID-regulation). Available in two types for pressure ranges from 0 to 50 kPa.

• Quick and easy mounting
• Supply: 10-35 VDC (2-cable supply)
• Favorable price
• Advantageous performance ratio

Filter control is used for the cleaning of pleated filter cartridges for easy and cost effective automatic solution.

• Filter control with timer-kontrol
• Easy setting of cleaning impulse and interval time
• Mounted directly on jet valve
• Mainly for weather-protected application

Controls cleaning of compressed-air cleaned filter units. Cleans at a very high differential pressure above the filter cartridges. When the fan stops, the automatic after-cleaning begins

• Control ECO-S provides sustantial energy consumption optimization
• Only filter cartridge cleaning as needed
• Protects the filter cartridges
• Easy programming
• Shows differential pressure on display

Temperature sensor RT101 for signaling at high temperatures in units/channels, e.g. in the case of a fire. Has standard potential-free open/close switch

• RT101 ensures alarm at fire
• Must be connected to signal device or acoustic sounder
• Simple mounting
• Adjustable between 25°C and 90°C

Leak detector type RP 04/ SDM-1 can be used in connection with filter systems, where monitoring the amount of particles in the exhaust air and alarming at elevated concentrations are required.

• Leak detector type RP 04 / SDM-01 for detecting dust emissions down to 0.1mg/m3
• Supply voltage: 24VAC / 115VAC / 230VAC +/-15%, 50-60Hz
• Temperature range: -10°C to +60°C
• Relay outputs: 10A 250VAC / 10A 30VDC
• Max power consumption: 10VA-10W
• IP Rating: IP56

Fill-level sensor OEM-K is used, when you require to get an alarm at filled dust container and the like, e.g. in connection with cyclones and filter units.

• Short reaction time
• Easy setting of sensibility
• Supply voltage 230VAC
• Ensures for overfilled dust container
• Signal device or sounder can be connected