Funnels and nozzles

ST hoods are intended for low and medium pressure extraction. They have an unique and special design that provides a large extraction area as well as large free work area.

• Robust extraction hoods type ST
• Efficient extraction
• Many applications
• Extraction hoods for mounting on Gram extraction arms
• Extraction hoods with and without magnet
• Extraction hoods with and with damper
• Extraction hoods with and without handle
• Large work area beneath the hood

Angle nozzle type SOR is used in connection with low and medium pressure extraction. SOR can be used as extraction hood on Gram extraction arms or hoses.

• Robust construction
• Ideal for focused extraction areas
• Suitable for compressed suction areas
• Damper can open and close for the extraction
• Made in black steel and powder enamelled
• Available in 4 different sizes
• Made with damper and handle (only valid for ø80 and ø100mm)

Extraction hoods in clear polycarbonate type POLY intended for mounting on Gram extraction arms type LGf and RGF by additional fitting. It covers a large extraction area.

• POLY covers a large extraction area
• The user can look thorugh the hood
• Made in transparent polycarbonate
• Available in connection piece diameters: ø100mm, ø125mm and ø160mm
• Connection piece made for nipple measurements
• Cupolar extraction hood outer diameter is 410mm

Hood with steel base type STF is intended for application in connection with low and medium pressure extraction. Can be placed on a table or at a work place, where extraction is required.

• STF can easily be placed according to request
• Made in durable material
• Delivered in black steel that is powder enamelled
• Occurs in different dimensions and diameters
• Can easily be placed in different directions
• STF is available with magnet base against additional payment

Rectangular extraction hood type FF-MS is unsed at low and medium pressure extraction. Suitable for use in connection with the extraction of smoke or gases, where you require a linearly extraction.

• Robust extraction hood
• Many applications
• Rectangular extraction hoods with magnet and damper
• Rectangular extraction hoods are delivered with handle
• Can be delivered with micro-switch

Gram slot nozzles type LSP-MS are used in connection with low and medium pressure extraction, Consist of a long 500m slot nozzle with extraction connection in either ø80mm or ø100mm.

• Made with 500mm slot length
• Distributes the air aabove the extraction slot
• Magnet mounted on the underside
• Made in strong 1.5mm steel plate construction
• Delivered powder enamelled
• Available in 2 sizes
• Manufactured with rotating damper
• Is available with micro-switch

Special reducers type SPR are intended for use at low and medium pressure extraction. Used, whern you wish to change the diameter between connection, hose or piping.

• Durable construction
• Wall thickness: 1.5mm black steel
• Easy mounting
• Ideal for the change of diameter
• Wide range of sizes in the program
• Standard powder enamelled
• Many applications

Gram hose connector type SSB is low and medium pressure areas. Gram hose connector is used for easy connection of hoses by bayonet joining.

• Hose connector SSB is made in 1.5mm black steel
• Durable construction
• Delivered powder enamelled
• Mating parts with bayonet joining
• Mating parts end in nipple connection
• Hose can easily be mounted by hose clamp

Gram hose connector type SSF is used in low and medium pressure areas. Hose connector is used for easy connection of hosed by firm hose clamps.

• Hose connector type SSF is made in 1.5mm black steel (ø50mm and ø76mm)
• Durable construction
• Delivered powder enamelled (ø50mm and ø76mm)
• Hose can easily be connected by hose clamp

Axial swivel type AKD is used at low and medium extraction extraction. Used for e.g. in hoods and slot nozzles. AKD can rotate 360° + (infinitely around).

• Robustly constructed
• Free rotation 360°+
• Connection pieces made as nipple measurements
• Made in black steel, powder enamelled
• Bearing made in bronze (self-lubricating)
• Available in 3 different sizes
• Many applications

Floor extraction fixed is intended for low and medium pressure extraction. GSF is fastened to the wall, so larger chips can be raked to the opening and extracted to an extraction unit.

• Robust durable product
• Very easy to mount
• Equipped with nipple measurements on the connection
• Aligned suction surface compared to the connection
• Powder enamelled

Gram floor extraction handle type GST is used in connection with low and medium pressure extraction. Is used for cleaning of floors in an efficient and ergonomically correct way.

• Designed ergonomically correct
• Vacuum cleaner head can turn at the handle end
• Easy to handle
• Low weight at operating
• Equipped with plastic handle
• Available in 3 sizes in the width 300mm (suction width)
• Available in one size in the width 500mm (suction width)

Gram cleaning pipe type RENR is intended for use in low and medium pressure areas. RENR is used for cleaning of workbenches, machines and work places.

• Cleaning pipe in plastic material
• Does not scratch tables and machines
• Easy to mount
• User-friendly
• Extra low weight
• Also available in steel version with handle
• The steel version is powder enamelled

Gram slot nozzled type VSPK-M is used in connection high-pressure extraction. Consists o a 150mm slot nozzle with connection in either ø45mm or ø50mm with magnet.

• Made with 150mm slot length
• Distributes the air over the extraction slot
• Magnet mounted on the underside of VSPK-M
• Made in strong 1.5mm steel plate construction
• Delivered in powder enamelled
• Made in 2 different sizes

Gram slot nozzle type VSPL-M is used in connection with high-pressure extraction. Consists of a 300mm slot nozzle with connection in either ø45mm or ø50mm with magnet.

• Made with 300mm slot length
• Distributes the air above the suction slot
• Magnet mounted on the underside of VSPL-M
• Made in strong 1.5mm steel plate construction
• Delivered powder enamelled
• Delivered in 2 different sizes

Gram extraction slot with magnet type SUS-M is used in connection with medium and high-pressure extraction. Consists of a long extraction slot with connection in ø50mm.

• Made with ø50mm extraction connection
• Unique air distribution extraction slot
• Magnet mounted on the underside
• Constructed in 1.5mm steel plate construction
• Delivered powder enamelled
• Made in length 500mm

Hood with steel hose and magnet type KTS is used at medium and high pressure extraction. Intended for the following processes: Welding, soldering and glueing.

• Easily positionable
• Equipped with steel hose
• twistable steel hose
• Steel hose with hood
• Equipped with magnet
• Hood and connection piece are powder enamelled
• Available in 2 sizes